TWO TUBE MICS IN ONE
The LA-320’s onboard sound-shaping eliminates the need for mic swaps and wasted time. Choose between the warmth of a classic tube microphone and the clarity of a modern tube microphone at the flip of a switch.
CUSTOM CAPSULE
Unlike classic capsule designs, our newly improved, hand-tuned 32mm transducer naturally imparts gentle compression and balance to any sound source, making it ideal for use on traditionally troublesome applications. This means getting a great recording in the real world is faster and easier.
INSIDE STORY
The LA-320 is hand-soldered with high-resolution, low-distortion polypropylene capacitors and resistors, a dual triode vacuum tube, and a vintage-inspired output transformer.
IN THE BOX
LA-320 / SPIDER SHOCK MOUNT / POWER SUPPLY / 5-PIN CABLE
LA-320
SPIDER SHOCK MOUNT
POWER SUPPLY
5-PIN CABLE
SPECIFICATIONS
& DIAGRAMS
TYPE
TRANSFORMER BALANCED TUBE CONDENSER
TUBE
ECC83
CAPSULE
32MM CENTER TERMINATED PRESSURE GRADIENT
POLAR PATTERNS
CARDIOID
FREQ. RESPONSE
20HZ - 20KHZ
HIGH PASS
FLAT / 120Hz
LOW PASS
FLAT / 12kHz
DYNAMIC RANGE
120DB MINIMUM
MAX. SPL
0.5% THD @1000HZ: 130DB
IMPEDANCE
<200 OHMS
SELF-NOISE LEVEL
< 17DB-A
SENSITIVITY
14MV/PA (@1KHZ 74DB SPL)
CONNECTOR
5-PIN XLR (PSU TO MIC) + 3-PIN XLR (PSU TO PREAMP)
POWER
REQUIRES INCLUDED PSU (SWITCHABLE 100V TO 240V)
BOX DIMENSIONS
5” x 12” x 15”
BOX WEIGHT
8.2lbs
MIC W/SHOCK WEIGHT
1lb 11oz
HIGH & LOW CUT FILTERS
DESIGNED & TESTED
IN SILICON VALLEY, CA
EACH LA-320 IS LOVINGLY DESIGNED AND CRAFTED TO LAST A LIFETIME BY THE LAUTEN AUDIO FAMILY