UNMATCHED ISOLATION
270 degrees of off-axis rejection allows you to confidently capture loud, impactful sounds live without the need to replace toms or re-track guitars due to bleed.
DARK BY
DESIGN
Creating a microphone with such strong off-axis rejection had a unique timbral side-effect -- a sound similar to a ribbon microphone but without the fragility.
HIGH SPL & DYNAMIC RANGE
Capable of withstanding a staggering 135dB of SPL without internal padding, the LS-308 is nearly impossible to overload. Capture the loudest sound sources reserved for dynamic microphones with ease.
PREMIUM
COMPONENTS
The LS-308 signal path is finalized with high-resolution, low-distortion polypropylene capacitors and resistors, a US-made low-noise FET, and a custom wound output transformer.
ANALOG SOUND SHAPING
Two dedicated filters allow for immediate sound-shaping right at the source, removing the need to change out microphones in order to get the sound you want.
IN THE BOX
LS-308 / FLIGHT CASE / ADJUSTABLE HARD MOUNT / FOAM WINDSCREEN
LS-308
ADJUSTABLE
HARD MOUNT
FOAM WINDSCREEN
FLIGHT CASE
SPECIFICATIONS
& DIAGRAMS
TYPE
SIDE-ADDRESS PRESSURE GRADIENT
FET CONDENSER
CAPSULE
32MM
POLAR PATTERNS
SECOND-ORDER CARDIOID
FREQ. RESPONSE
20HZ - 20KHZ (ROLL OFF BEGINS AT 7KHZ DUE TO REJECTION
DYNAMIC RANGE
135DB MINIMUM
MAX. SPL
>135DB (0.5%THD@1000HZ)
IMPEDANCE
>150 OHMS
SELF-NOISE LEVEL
< 15DB-A
SENSITIVITY
10.5M/PA -46DBV (0DB=1V/PA 1KHZ)
CONNECTOR
3-PIN XLR
POWER
REQUIRES 48V PHANTOM POWER
HIGH & LOW CUT FILTERS
DESIGNED & TESTED IN SILICON VALLEY, CA
EACH LS-308 IS LOVINGLY DESIGNED AND CRAFTED TO
LAST A LIFETIME BY THE LAUTEN AUDIO FAMILY.